Wall Chaser – Omada Power Tools https://omadatools.com More Power To You Sat, 11 May 2024 09:31:15 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.7 https://omadatools.com/wp-content/uploads/2024/05/cropped-Omada-Tools-Favicon-1-2-32x32.png Wall Chaser – Omada Power Tools https://omadatools.com 32 32 Omada Concrete Groove Cutter | Wall Chaser Machine https://omadatools.com/product/concrete-groove-cutter-wall-chaser-machine/ https://omadatools.com/product/concrete-groove-cutter-wall-chaser-machine/#respond Fri, 08 Jul 2022 10:29:53 +0000 http://testing.omadatools.com/index.php/product/omada-concrete-wall-chaser-grooving-cutting/ Concrete Groove Cutter is a form of specialized tool that is twin-bladed. It is primarily used for cutting narrow channels in brick, stone and concrete walls. It is mainly used by electricians and plumbers. The tool is available in 110v to 230v and comes with an adjustable depth of cut for accurate results. OMADA wall chaser is powered by an electric motor to drive a pair of abrasive discs that are positioned closely together. This wall chaser machine is a similar design as that of the angle grinder. The basic functioning of wall chaser is with the help of continuous motion it is driven against the wall to cut the channels for electrical wiring and pipes.]]>

About the Product:

  1. Wall slotting machine, the utility model product belongs to the electric tool category, specifically a wall slotting machine, which is composed of a fuselage, a motor, a motor casing, a gear box, a bracket, a switch box, a knife cover, a gear pair, and an output. A combination of shafts, tools and handles.
  2. The wall slotting machine is characterized in that the output shaft forms an angle of less than 180 degrees with the bottom plane of the fuselage; the cutter is mounted on the cantilever of the output shaft; and the bottom of the fuselage is provided with two rollers.
  3. The wall grooving machine can use the tool with the smallest diameter to open the deep and wide groove. Because the tool diameter is small, it can be realized with the minimum output power, thus reducing the energy consumption and improving the service life of the machine itself.
  4. The body can be rolled on the wall and the depth and width of the slot can be controlled by adjusting the height of the wheel. The structure is reasonable, easy to use, and energy efficient.
  5. The wall slotting machine can open the construction tank in one operation, the speed is fast, the unnecessary line is needed, and other auxiliary tools are used for one molding. It is the old house bright line, the new house decoration, the telephone line, the network cable, the cable TV. Ideal grooving tools such as hydropower lines.

Features:

  • Clean, compact and comfortable. wall chaser offers the most efficient cutting of clean edged grooves for channels.
  • Ergonomically designed handle for comfort.
  • Conveniently located front cover prevents dust from spreading at every cutting depth.

Specification:

  • Saw Blade Size: 168-180mm,
  • Maximum Cutting Depth: 50mm,
  • Output Power: 3600W,
  • Rated Power: 1800r/min,
  • No-load Speed: 7000r/min

User Manual:

Omada Wall Chaser Grooving Cutting - 168: User Manual - Click Here to Download

]]> https://omadatools.com/product/concrete-groove-cutter-wall-chaser-machine/feed/ 0 Omada 133J Wall Cutting Machine | Grooving Cutter Tool https://omadatools.com/product/133j-wall-cutting-machine-grooving-cutter/ https://omadatools.com/product/133j-wall-cutting-machine-grooving-cutter/#respond Fri, 08 Jul 2022 10:29:52 +0000 http://testing.omadatools.com/index.php/product/omada-wall-chaser-cutter-133j/ Wall cutting machine is a form of specialized tool that is twin-bladed. Wall Groove Machine is primarily used for cutting narrow channels in brick, stone and concrete walls. It is mainly used by electricians and plumbers. The tool is available in 110v to 230v and comes with an adjustable depth of cut for accurate results. Grooving cutter is powered by an electric motor to drive a pair of abrasive discs that are positioned closely together. It has a similar design as that of the angle grinder. The basic functioning of wall chaser is with the help of continuous motion it is driven against the wall to cut the channels for electrical wiring and pipes.]]>

About the Product:

  1. Wall slotting machine, the utility model product belongs to the electric tool category, specifically a wall slotting machine, which is composed of a fuselage, a motor, a motor casing, a gear box, a bracket, a switch box, a knife cover, a gear pair, and an output. A combination of shafts, tools and handles.
  2. The wall slotting machine is characterized in that the output shaft forms an angle of less than 180 degrees with the bottom plane of the fuselage; the cutter is mounted on the cantilever of the output shaft; and the bottom of the fuselage is provided with two rollers.
  3. The wall grooving machine can use the tool with the smallest diameter to open the deep and wide groove. Because the tool diameter is small, it can be realized with the minimum output power, thus reducing the energy consumption and improving the service life of the machine itself.
  4. The body can be rolled on the wall and the depth and width of the slot can be controlled by adjusting the height of the wheel. The structure is reasonable, easy to use, and energy efficient.
  5. The wall slotting machine can open the construction tank in one operation, the speed is fast, the unnecessary line is needed, and other auxiliary tools are used for one molding. It is the old house bright line, the new house decoration, the telephone line, the network cable, the cable TV. Ideal grooving tools such as hydropower lines.

Features:

  • Clean, compact and comfortable. wall chaser offers the most efficient cutting of clean edged grooves for channels.
  • Ergonomically designed handle for comfort.
  • Conveniently located front cover prevents dust from spreading at every cutting depth.

Specification:

  • Saw Blade Size: 133×4.5x20mm,
  • Cutting Ability: 45x42mm(DxW),
  • Output Power: 5800W,
  • Rated Power: 2800r/min,
  • No-load Speed: 6500r/min

User Manual:

Omada Wall Chaser Cutter - 133J: User Manual - Click Here to Download

]]> https://omadatools.com/product/133j-wall-cutting-machine-grooving-cutter/feed/ 0 Omada 133 Wall Chaser Machine | Electric Wall Chaser https://omadatools.com/product/133-wall-chaser-machine-electric-wall-chase/ https://omadatools.com/product/133-wall-chaser-machine-electric-wall-chase/#respond Fri, 08 Jul 2022 10:29:50 +0000 http://testing.omadatools.com/index.php/product/omada-wall-chaser-cutter-133/ Wall Chaser Machine is a form of specialized tool that is twin-bladed. It is primarily used for cutting narrow channels in brick, stone and concrete walls. It is mainly used by electricians and plumbers. The tool is available in 110v to 230v and comes with an adjustable depth of cut for accurate results. Omada Wall Chaser is powered by an electric motor to drive a pair of abrasive discs that are positioned closely together. It has a similar design as that of the angle grinder. The basic functioning of wall chaser blade is with the help of continuous motion it is driven against the wall to cut the channels for electrical wiring and pipes.]]>

About the Product:

  1. Wall slotting machine, the utility model product belongs to the electric tool category, specifically a wall slotting machine, which is composed of a fuselage, a motor, a motor casing, a gear box, a bracket, a switch box, a knife cover, a gear pair, and an output. A combination of shafts, tools and handles.
  2. The wall slotting machine is characterized in that the output shaft forms an angle of less than 180 degrees with the bottom plane of the fuselage; the cutter is mounted on the cantilever of the output shaft; and the bottom of the fuselage is provided with two rollers.
  3. The wall grooving machine can use the tool with the smallest diameter to open the deep and wide groove. Because the tool diameter is small, it can be realized with the minimum output power, thus reducing the energy consumption and improving the service life of the machine itself.
  4. The body can be rolled on the wall and the depth and width of the slot can be controlled by adjusting the height of the wheel. The structure is reasonable, easy to use, and energy efficient.
  5. The wall slotting machine can open the construction tank in one operation, the speed is fast, the unnecessary line is needed, and other auxiliary tools are used for one molding. It is the old house bright line, the new house decoration, the telephone line, the network cable, the cable TV. Ideal grooving tools such as hydropower lines.

Features:

  • Clean, compact and comfortable. wall chaser offers the most efficient cutting of clean edged grooves for channels.
  • Ergonomically designed handle for comfort.
  • Conveniently located front cover prevents dust from spreading at every cutting depth.

Specification:

  • Rated Voltage: 110V-220V (AC),
  • Frequency: 50-60Hz,
  • Rate Power: 2800W,
  • Output Rotational Speed (No-Load Speed): 6000r/min,
  • Grooving Depth Adjustment: 35mm,
  • Grooving Width Adjustment: 35mm
  • Saw blade Specifications: 133×4.5x20mm,
  • Cutting Ability: 45x42mm(DxW),
  • Output Power: 5800W,
  • Rated Power: 2800W,
  • No-load Speed: 6500r/min

User Manual:

Omada Wall Chaser Cutter - 133: User Manual - Click Here to Download

]]> https://omadatools.com/product/133-wall-chaser-machine-electric-wall-chase/feed/ 0 Omada 125B Electric Wall Chaser | Concrete Groove Cutter https://omadatools.com/product/125b-electric-wall-chaser-groove-cutter/ https://omadatools.com/product/125b-electric-wall-chaser-groove-cutter/#respond Fri, 08 Jul 2022 10:29:48 +0000 http://testing.omadatools.com/index.php/product/omada-wall-chaser-cutter-125b/ Electric Wall Chaser is a form of specialized tool that is twin-bladed. It is primarily used for cutting narrow channels in brick, stone and concrete walls. It is mainly used by electricians and plumbers. The tool is available in 110v to 230v and comes with an adjustable depth of cut for accurate results. Wall chaser machine is powered by an electric motor to drive a pair of abrasive discs that are positioned closely together. Wall chaser machine a similar design as that of the angle grinder. The basic functioning of wall chaser is with the help of continuous motion it is driven against the wall to cut the channels for electrical wiring and pipes.]]>

About the Product:

  1. Wall slotting machine, the utility model product belongs to the electric tool category, specifically a wall slotting machine, which is composed of a fuselage, a motor, a motor casing, a gear box, a bracket, a switch box, a knife cover, a gear pair, and an output. A combination of shafts, tools and handles.
  2. The wall slotting machine is characterized in that the output shaft forms an angle of less than 180 degrees with the bottom plane of the fuselage; the cutter is mounted on the cantilever of the output shaft; and the bottom of the fuselage is provided with two rollers.
  3. The wall grooving machine can use the tool with the smallest diameter to open the deep and wide groove. Because the tool diameter is small, it can be realized with the minimum output power, thus reducing the energy consumption and improving the service life of the machine itself.
  4. The body can be rolled on the wall and the depth and width of the slot can be controlled by adjusting the height of the wheel. The structure is reasonable, easy to use, and energy efficient.
  5. The wall slotting machine can open the construction tank in one operation, the speed is fast, the unnecessary line is needed, and other auxiliary tools are used for one molding. It is the old house bright line, the new house decoration, the telephone line, the network cable, the cable TV. Ideal grooving tools such as hydropower lines.

Features:

  • Clean, compact and comfortable. wall chaser offers the most efficient cutting of clean edged grooves for channels.
  • Ergonomically designed handle for comfort.
  • Conveniently located front cover prevents dust from spreading at every cutting depth.

Specification:

  • Rated Voltage: 110V-220V (AC),
  • Frequency: 50-60Hz,
  • Rate Power: 2800W,
  • Output Rotational Speed (No-Load Speed): 6000r/min,
  • Grooving Depth Adjustment: 35mm,
  • Grooving Width Adjustment: 35mm

User Manual:

Omada Wall Chaser Cutter - 125B: User Manual - Click Here to Download

]]> https://omadatools.com/product/125b-electric-wall-chaser-groove-cutter/feed/ 0 Omada 125A Brick Wall Cutter Machine | Wall Chaser Tools https://omadatools.com/product/125a-brick-wall-cutter-machine-wall-chaser/ https://omadatools.com/product/125a-brick-wall-cutter-machine-wall-chaser/#respond Fri, 08 Jul 2022 10:29:47 +0000 http://testing.omadatools.com/index.php/product/omada-wall-chaser-cutter-125a/ Brick Wall Cutter Machine is a form of specialized tool that is twin-bladed. It is primarily used for cutting narrow channels in brick, stone and concrete walls. It is mainly used by electricians and plumbers. Grooving cutter is available in 110v to 230v and comes with an adjustable depth of cut for accurate results. Wall Chaser Tools is powered by an electric motor to drive a pair of abrasive discs that are positioned closely together. It has a similar design as that of the angle grinder. The basic functioning of wall chaser is with the help of continuous motion it is driven against the wall to cut the channels for electrical wiring and pipes.]]>

About the Product:

  1. Wall slotting machine, the utility model product belongs to the electric tool category, specifically a wall slotting machine, which is composed of a fuselage, a motor, a motor casing, a gear box, a bracket, a switch box, a knife cover, a gear pair, and an output. A combination of shafts, tools and handles.
  2. The wall slotting machine is characterized in that the output shaft forms an angle of less than 180 degrees with the bottom plane of the fuselage; the cutter is mounted on the cantilever of the output shaft; and the bottom of the fuselage is provided with two rollers.
  3. The wall grooving machine can use the tool with the smallest diameter to open the deep and wide groove. Because the tool diameter is small, it can be realized with the minimum output power, thus reducing the energy consumption and improving the service life of the machine itself.
  4. The body can be rolled on the wall and the depth and width of the slot can be controlled by adjusting the height of the wheel. The structure is reasonable, easy to use, and energy efficient.
  5. The wall slotting machine can open the construction tank in one operation, the speed is fast, the unnecessary line is needed, and other auxiliary tools are used for one molding. It is the old house bright line, the new house decoration, the telephone line, the network cable, the cable TV. Ideal grooving tools such as hydropower lines.

Features:

  • Clean, compact and comfortable. wall chaser offers the most efficient cutting of clean edged grooves for channels.
  • Ergonomically designed handle for comfort.
  • Conveniently located front cover prevents dust from spreading at every cutting depth.

Specification:

  • Rated Voltage: 110V-220V (AC),
  • Frequency: 50-60Hz,
  • Rate Power: 2800W,
  • Output Rotational Speed (No-Load Speed): 6000r/min,
  • Grooving Depth Adjustment: 35mm,
  • Grooving Width Adjustment: 35mm

User Manual:

Omada Wall Chaser Cutter - 125A: User Manual - Click Here to Download

]]> https://omadatools.com/product/125a-brick-wall-cutter-machine-wall-chaser/feed/ 0